Problem mit der Installation auf XenServer

Dichter · September 10, 2013, 3:33am

Ahoy,

Wir haben einen Problem:
die Installation von MobyDick auf XenServer will nicht klappen.
Die Suche dazu hier im Forum hat nur diesen Thread Thread ergeben,
ist aber nicht wirklich hilfreich.

Umgebung:
XenServer 6.2 build number 70446c build date 2013-06-21
mit Patsches Applied: XS62E001, XS62E002, XS62E004
Virtualisierungssupport ist im Bios eingeschaltet, es sind andere
VMs erfolgreich am laufen (ein Debian NFS server, Sophos UTM)

MobyDick Installationsimage md_iso_70302_64bit.iso
MobyDick Livedisk (Setup) version 2.02.00.R

Problem: MobyDick scheint die Festplatte nicht zu erkennen.

Nach dem Boot kommt der Installer mit der Auswahl der Sprache,
dann dem Hinweis, dass alle Daten auf der Festplatte gelöscht werden,
dann steigt der Installer aus mit folgendem Screen:

ERROR: Could not mount harddisk, starting debug shell…

XenServer sagt, die Platte wäre unter /dev/hda eingebunden,
im der debug shell von MobyDick sieht man unter
/sys/block nur sr0

maik · September 10, 2013, 5:14am

Hallo,

welchen HDD Controller emuliert die VM ? Wie gross ist die virtuelle HDD ?

Grüße

Maik

Dichter · September 10, 2013, 6:55am

Die Größe der Platte ist über 8GB, ich habe nun alle möglichen Templates für linux und windows probiert.
Welchen HDD Controler der XenServer emuliert ist mir nicht bekannt.

maik · September 11, 2013, 1:00am

Hi,

hast Du einmal ein “anderers” Linux Live System gebootet ? Wird dort die HDD erkannt ?

Grüße

Maik

Dichter · September 11, 2013, 2:47am

ja, wie schon gesagt - Debian Wheezy und Sophos UTM (Astaro) liessen sich problemlos installieren, bzw booten. Auch Windows 2003 R2.

maik · September 11, 2013, 2:58am

Hi,

auf die MobyDick VM könntest Du also Debian 7 installieren ?
Starte einmal das Debian in der MobyDick VM und poste den Output von “dmesg”.

Grüße

Maik

Dichter · September 11, 2013, 5:10am

Ok, mittlerweile bin ich soweit - ich habe die MobyDick mal in eine Vmware Fusion installiert, und den .vdmk disk dann in den XenServer importiert.
mit dem gleichen Effekt - die Kiste findet die Festplatte nicht… (und auch andere devices wie eth0, etc - überhaupt sieht es so aus, dass das /dev/ filesystem nicht gemountet ist)

Also - diese virtuelle Maschiene mit MobyDick mal mit Debian-live-7.0.0-amd64-rescue.iso gebootet, alles läuft normal, Festplatte wird als /dev/xvda erkannt, hier ist das dmesg
(Das Dmesg von der MobyDick selber könnte ich nur in Bildschirm-Fotos liefern, da die kiste ja ohne Netzwerk kommt, und ich den Text nicht rauskopieren kann…)

0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-15) ) #1 SMP Debian 3.2.41-2
0.000000] Command line: boot=live config quiet splash initrd=/live/initrd.img BOOT_IMAGE=/live/vmlinuz 
0.000000] BIOS-provided physical RAM map:
0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
0.000000]  BIOS-e820: 0000000000100000 - 000000004fc00000 (usable)
0.000000]  BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
0.000000] NX (Execute Disable) protection: active
0.000000] SMBIOS 2.4 present.
0.000000] DMI: Xen HVM domU, BIOS 4.1.5 06/14/2013
0.000000] Hypervisor detected: Xen HVM
0.000000] Xen version 4.1.
0.000000] Xen Platform PCI: I/O protocol version 1
0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
0.000000] You might have to change the root device
0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
0.000000] in your root= kernel command line option
0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==&gt; (reserved)
0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
0.000000] No AGP bridge found
0.000000] last_pfn = 0x4fc00 max_arch_pfn = 0x400000000
0.000000] MTRR default type: write-back
0.000000] MTRR fixed ranges enabled:
0.000000]   00000-9FFFF write-back
0.000000]   A0000-BFFFF write-combining
0.000000]   C0000-FFFFF write-back
0.000000] MTRR variable ranges enabled:
0.000000]   0 base 00F0000000 mask 3FF8000000 uncachable
0.000000]   1 base 00F8000000 mask 3FFC000000 uncachable
0.000000]   2 disabled
0.000000]   3 disabled
0.000000]   4 disabled
0.000000]   5 disabled
0.000000]   6 disabled
0.000000]   7 disabled
0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0.000000] found SMP MP-table at [ffff8800000fb710] fb710
0.000000] initial memory mapped : 0 - 20000000
0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
0.000000] init_memory_mapping: 0000000000000000-000000004fc00000
0.000000]  0000000000 - 004fc00000 page 2M
0.000000] kernel direct mapping tables up to 4fc00000 @ 1fffd000-20000000
0.000000] RAMDISK: 4ee7d000 - 4fbdf000
0.000000] ACPI: RSDP 00000000000ea020 00024 (v02    Xen)
0.000000] ACPI: XSDT 00000000fc00eb80 00044 (v01    Xen      HVM 00000000 HVML 00000000)
0.000000] ACPI: FACP 00000000fc00e940 000F4 (v04    Xen      HVM 00000000 HVML 00000000)
0.000000] ACPI: DSDT 00000000fc002c40 0BC75 (v02    Xen      HVM 00000000 INTL 20090123)
0.000000] ACPI: FACS 00000000fc002c00 00040
0.000000] ACPI: APIC 00000000fc00ea40 000D8 (v02    Xen      HVM 00000000 HVML 00000000)
0.000000] ACPI: HPET 00000000fc00eb20 00038 (v01    Xen      HVM 00000000 HVML 00000000)
0.000000] ACPI: WAET 00000000fc00eb58 00028 (v01    Xen      HVM 00000000 HVML 00000000)
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at 0000000000000000-000000004fc00000
0.000000] Initmem setup node 0 0000000000000000-000000004fc00000
0.000000]   NODE_DATA [000000004fbfb000 - 000000004fbfffff]
0.000000]  [ffffea0000000000-ffffea00011fffff] PMD -&gt; [ffff88004d200000-ffff88004e3fffff] on node 0
0.000000] Zone PFN ranges:
0.000000]   DMA      0x00000010 -&gt; 0x00001000
0.000000]   DMA32    0x00001000 -&gt; 0x00100000
0.000000]   Normal   empty
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[2] active PFN ranges
0.000000]     0: 0x00000010 -&gt; 0x0000009e
0.000000]     0: 0x00000100 -&gt; 0x0004fc00
0.000000] On node 0 totalpages: 326542
0.000000]   DMA zone: 56 pages used for memmap
0.000000]   DMA zone: 5 pages reserved
0.000000]   DMA zone: 3921 pages, LIFO batch:0
0.000000]   DMA32 zone: 4410 pages used for memmap
0.000000]   DMA32 zone: 318150 pages, LIFO batch:31
0.000000] ACPI: PM-Timer IO Port: 0x1f48
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ5 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] ACPI: IRQ10 used by override.
0.000000] ACPI: IRQ11 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
0.000000] SMP: Allowing 15 CPUs, 14 hotplug CPUs
0.000000] nr_irqs_gsi: 64
0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
0.000000] Allocating PCI resources starting at 4fc00000 (gap: 4fc00000:ac400000)
0.000000] Booting paravirtualized kernel on Xen HVM
0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:15 nr_node_ids:1
0.000000] PERCPU: Embedded 28 pages/cpu @ffff88004ec00000 s82944 r8192 d23552 u131072
0.000000] pcpu-alloc: s82944 r8192 d23552 u131072 alloc=1*2097152
0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 -- 
0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 322071
0.000000] Policy zone: DMA32
0.000000] Kernel command line: boot=live config quiet splash initrd=/live/initrd.img BOOT_IMAGE=/live/vmlinuz 
0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
0.000000] Checking aperture...
0.000000] No AGP bridge found
0.000000] Calgary: detecting Calgary via BIOS EBDA area
0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
0.000000] Memory: 1263836k/1306624k available (3420k kernel code, 456k absent, 42332k reserved, 3318k data, 576k init)
0.000000] Hierarchical RCU implementation.
0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
0.000000] NR_IRQS:33024 nr_irqs:1208 16
0.000000] Xen HVM callback vector for event delivery is enabled
0.000000] Console: colour VGA+ 80x25
0.000000] console [tty0] enabled
0.000000] hpet clockevent registered
0.000000] Detected 2333.430 MHz processor.
0.008000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.86 BogoMIPS (lpj=9333720)
0.008000] pid_max: default: 32768 minimum: 301
0.008000] Security Framework initialized
0.008000] AppArmor: AppArmor disabled by boot time parameter
0.008000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
0.008000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
0.008000] Mount-cache hash table entries: 256
0.008000] Initializing cgroup subsys cpuacct
0.008000] Initializing cgroup subsys memory
0.008000] Initializing cgroup subsys devices
0.008000] Initializing cgroup subsys freezer
0.008000] Initializing cgroup subsys net_cls
0.008000] Initializing cgroup subsys blkio
0.008000] Initializing cgroup subsys perf_event
0.008000] mce: CPU supports 0 MCE banks
0.008000] SMP alternatives: switching to UP code
0.041167] ACPI: Core revision 20110623
0.047012] x2apic not enabled, IRQ remapping init failed
0.047016] Switched APIC routing to physical flat.
0.048296] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
0.088325] CPU0: Intel(R) Xeon(R) CPU           L5410  @ 2.33GHz stepping 06
0.088347] Xen: using vcpuop timer interface
0.088359] installing Xen timer for CPU 0
0.088448] Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
0.088669] NMI watchdog disabled (cpu0): hardware events not enabled
0.088695] Brought up 1 CPUs
0.088699] Total of 1 processors activated (4666.86 BogoMIPS).
0.089192] devtmpfs: initialized
0.092004] print_constraints: dummy: 
0.092004] NET: Registered protocol family 16
0.092004] ACPI: bus type pci registered
0.092083] PCI: Using configuration type 1 for base access
0.092785] bio: create slab &lt;bio-0&gt; at 0
0.092911] ACPI: Added _OSI(Module Device)
0.092915] ACPI: Added _OSI(Processor Device)
0.092918] ACPI: Added _OSI(3.0 _SCP Extensions)
0.092922] ACPI: Added _OSI(Processor Aggregator Device)
0.094505] ACPI: EC: Look up EC in DSDT
0.099224] ACPI: Interpreter enabled
0.099230] ACPI: (supports S0 S5)
0.099243] ACPI: Using IOAPIC for interrupt routing
0.146158] ACPI: No dock devices found.
0.146163] HEST: Table not found.
0.146167] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
0.146245] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
0.146389] pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
0.146393] pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
0.146397] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
0.146401] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfbffffff]
0.146500] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
0.147178] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
0.148133] pci 0000:00:01.1: [8086:7010] type 0 class 0x000101
0.148868] pci 0000:00:01.1: reg 20: [io  0xc220-0xc22f]
0.149384] pci 0000:00:01.2: [8086:7020] type 0 class 0x000c03
0.150029] pci 0000:00:01.2: reg 20: [io  0xc200-0xc21f]
0.150525] pci 0000:00:01.3: [8086:7113] type 0 class 0x000680
0.150549] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
0.150551] * this clock source is slow. Consider trying other clock sources
0.151364] pci 0000:00:01.3: quirk: [io  0x1f40-0x1f7f] claimed by PIIX4 ACPI
0.151647] pci 0000:00:02.0: [1013:00b8] type 0 class 0x000300
0.151825] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf1ffffff pref]
0.151954] pci 0000:00:02.0: reg 14: [mem 0xf3000000-0xf3000fff]
0.152728] pci 0000:00:03.0: [5853:0001] type 0 class 0x000100
0.152925] pci 0000:00:03.0: reg 10: [io  0xc000-0xc0ff]
0.153058] pci 0000:00:03.0: reg 14: [mem 0xf2000000-0xf2ffffff pref]
0.153907] ACPI: PCI Interrupt Routing Table \_SB_.PCI0._PRT]
0.154522]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
0.402310] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
0.402476] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
0.402657] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
0.402839] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
0.402970] xen/balloon: Initialising balloon driver.
0.402991] xen-balloon: Initialising balloon driver.
0.403114] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
0.403119] vgaarb: loaded
0.403121] vgaarb: bridge control possible 0000:00:02.0
0.403171] PCI: Using ACPI for IRQ routing
0.403175] PCI: pci_cache_line_size set to 64 bytes
0.403759] reserve RAM buffer: 000000000009e000 - 000000000009ffff 
0.403765] reserve RAM buffer: 000000004fc00000 - 000000004fffffff 
0.403897] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
0.403910] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
0.403915] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
0.408123] Switching to clocksource xen
0.409760] pnp: PnP ACPI init
0.409776] ACPI: bus type pnp registered
0.409798] pnp 00:00: [mem 0x00000000-0x0009ffff]
0.409833] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
0.409838] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
0.409911] pnp 00:01: [bus 00-ff]
0.409915] pnp 00:01: [io  0x0cf8-0x0cff]
0.409919] pnp 00:01: [io  0x0000-0x0cf7 window]
0.409923] pnp 00:01: [io  0x0d00-0xffff window]
0.409926] pnp 00:01: [mem 0x000a0000-0x000bffff window]
0.409930] pnp 00:01: [mem 0xf0000000-0xfbffffff window]
0.409959] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
0.409971] pnp 00:02: [io  0x10c0-0x1141]
0.409975] pnp 00:02: [io  0xb044-0xb047]
0.410007] system 00:02: [io  0x10c0-0x1141] has been reserved
0.410011] system 00:02: [io  0xb044-0xb047] has been reserved
0.410016] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
0.410044] pnp 00:03: [mem 0xfed00000-0xfed003ff]

Dichter · September 11, 2013, 5:11am

und hier der Rest (da der Post sonst zu lang ist)

0.410071] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.410094] pnp 00:04: [io  0x0010-0x001f]
0.410097] pnp 00:04: [io  0x0022-0x002d]
0.410101] pnp 00:04: [io  0x0030-0x003f]
0.410104] pnp 00:04: [io  0x0044-0x005f]
0.410107] pnp 00:04: [io  0x0062-0x0063]
0.410110] pnp 00:04: [io  0x0065-0x006f]
0.410113] pnp 00:04: [io  0x0072-0x007f]
0.410116] pnp 00:04: [io  0x0080]
0.410120] pnp 00:04: [io  0x0084-0x0086]
0.410123] pnp 00:04: [io  0x0088]
0.410126] pnp 00:04: [io  0x008c-0x008e]
0.410129] pnp 00:04: [io  0x0090-0x009f]
0.410132] pnp 00:04: [io  0x00a2-0x00bd]
0.410135] pnp 00:04: [io  0x00e0-0x00ef]
0.410140] pnp 00:04: [io  0x08a0-0x08a3]
0.410143] pnp 00:04: [io  0x0cc0-0x0ccf]
0.410146] pnp 00:04: [io  0x04d0-0x04d1]
0.410183] system 00:04: [io  0x08a0-0x08a3] has been reserved
0.410188] system 00:04: [io  0x0cc0-0x0ccf] has been reserved
0.410192] system 00:04: [io  0x04d0-0x04d1] has been reserved
0.410196] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
0.410210] pnp 00:05: [dma 4]
0.410214] pnp 00:05: [io  0x0000-0x000f]
0.410217] pnp 00:05: [io  0x0081-0x0083]
0.410221] pnp 00:05: [io  0x0087]
0.410224] pnp 00:05: [io  0x0089-0x008b]
0.410227] pnp 00:05: [io  0x008f]
0.410230] pnp 00:05: [io  0x00c0-0x00df]
0.410233] pnp 00:05: [io  0x0480-0x048f]
0.410260] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
0.410275] pnp 00:06: [io  0x0070-0x0071]
0.410290] xen: --&gt; pirq=16 -&gt; irq=8 (gsi=8)
0.410294] pnp 00:06: [irq 8]
0.410322] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
0.410334] pnp 00:07: [io  0x0061]
0.410360] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
0.410389] xen: --&gt; pirq=17 -&gt; irq=12 (gsi=12)
0.410393] pnp 00:08: [irq 12]
0.410419] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
0.410438] pnp 00:09: [io  0x0060]
0.410441] pnp 00:09: [io  0x0064]
0.410450] xen: --&gt; pirq=18 -&gt; irq=1 (gsi=1)
0.410453] pnp 00:09: [irq 1]
0.410487] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
0.410507] pnp 00:0a: [io  0x03f0-0x03f5]
0.410511] pnp 00:0a: [io  0x03f7]
0.410519] xen: --&gt; pirq=19 -&gt; irq=6 (gsi=6)
0.410524] pnp 00:0a: [irq 6]
0.410528] pnp 00:0a: [dma 2]
0.410556] pnp 00:0a: Plug and Play ACPI device, IDs PNP0700 (active)
0.410582] pnp 00:0b: [io  0x03f8-0x03ff]
0.410590] xen: --&gt; pirq=20 -&gt; irq=4 (gsi=4)
0.410594] pnp 00:0b: [irq 4]
0.410621] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
0.410657] pnp 00:0c: [io  0x0378-0x037f]
0.410666] xen: --&gt; pirq=21 -&gt; irq=7 (gsi=7)
0.410670] pnp 00:0c: [irq 7]
0.410699] pnp 00:0c: Plug and Play ACPI device, IDs PNP0400 (active)
0.446189] pnp: PnP ACPI: found 13 devices
0.446193] ACPI: ACPI bus type pnp unregistered
0.453069] PCI: max bus depth: 0 pci_try_num: 1
0.453077] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
0.453081] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
0.453084] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
0.453088] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
0.453127] NET: Registered protocol family 2
0.453241] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
0.453860] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
0.455903] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
0.456491] TCP: Hash tables configured (established 262144 bind 65536)
0.456494] TCP reno registered
0.456516] UDP hash table entries: 1024 (order: 3, 32768 bytes)
0.456544] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
0.456694] NET: Registered protocol family 1
0.456711] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
0.456795] pci 0000:00:01.0: PIIX3: Enabling Passive Release
0.456887] pci 0000:00:01.0: Activating ISA DMA hang workarounds
0.457045] xen: --&gt; pirq=22 -&gt; irq=23 (gsi=23)
0.457560] pci 0000:00:02.0: Boot video device
0.457641] PCI: CLS 0 bytes, default 64
0.457695] Unpacking initramfs...
0.753211] Freeing initrd memory: 13704k freed
0.758041] audit: initializing netlink socket (disabled)
0.758059] type=2000 audit(1378899032.541:1): initialized
0.776016] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.776364] VFS: Disk quotas dquot_6.5.2
0.776397] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
0.776486] msgmni has been set to 2495
0.776689] alg: No test for stdrng (krng)
0.776715] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.776720] io scheduler noop registered
0.776722] io scheduler deadline registered
0.776733] io scheduler cfq registered (default)
0.776806] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
0.776831] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
0.776834] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
0.777000] acpiphp: Slot [0] registered
0.777078] acpiphp: Slot [1] registered
0.777152] acpiphp: Slot [2] registered
0.777222] acpiphp: Slot [3] registered
0.777294] acpiphp: Slot [4] registered
0.777367] acpiphp: Slot [5] registered
0.777437] acpiphp: Slot [6] registered
0.777509] acpiphp: Slot [7] registered
0.777583] acpiphp: Slot [8] registered
0.777655] acpiphp: Slot [9] registered
0.777726] acpiphp: Slot [10] registered
0.777798] acpiphp: Slot [11] registered
0.777872] acpiphp: Slot [12] registered
0.777944] acpiphp: Slot [13] registered
0.778016] acpiphp: Slot [14] registered
0.778089] acpiphp: Slot [15] registered
0.778164] acpiphp: Slot [16] registered
0.778236] acpiphp: Slot [17] registered
0.778309] acpiphp: Slot [18] registered
0.778382] acpiphp: Slot [19] registered
0.778456] acpiphp: Slot [20] registered
0.778528] acpiphp: Slot [21] registered
0.778602] acpiphp: Slot [22] registered
0.778675] acpiphp: Slot [23] registered
0.778747] acpiphp: Slot [24] registered
0.778822] acpiphp: Slot [25] registered
0.778895] acpiphp: Slot [26] registered
0.778967] acpiphp: Slot [27] registered
0.779041] acpiphp: Slot [28] registered
0.779113] acpiphp: Slot [29] registered
0.779185] acpiphp: Slot [30] registered
0.779258] acpiphp: Slot [31] registered
0.779922] intel_idle: does not run on family 6 model 23
0.779942] ERST: Table is not found!
0.779945] GHES: HEST is not enabled!
0.780043] xen: --&gt; pirq=23 -&gt; irq=30 (gsi=30)
0.782105] Grant table initialized
0.784749] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
0.820449] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.854380] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.854737] Linux agpgart interface v0.103
0.854953] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
0.856685] serio: i8042 KBD port at 0x60,0x64 irq 1
0.856696] serio: i8042 AUX port at 0x60,0x64 irq 12
0.856873] mousedev: PS/2 mouse device common for all mice
0.857564] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
0.857977] rtc_cmos 00:06: RTC can wake from S4
0.858102] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
0.858170] rtc0: alarms up to one day, 114 bytes nvram, hpet irqs
0.858183] cpuidle: using governor ladder
0.858186] cpuidle: using governor menu
0.858534] TCP cubic registered
0.858563] NET: Registered protocol family 10
0.859117] Mobile IPv6
0.859132] NET: Registered protocol family 17
0.859138] Registering the dns_resolver key type
0.859395] PM: Hibernation image not present or could not be loaded.
0.859452] registered taskstats version 1
0.861066] XENBUS: Device with no driver: device/vbd/768
0.861070] XENBUS: Device with no driver: device/vbd/5696
0.861073] XENBUS: Device with no driver: device/vif/0
0.861118] rtc_cmos 00:06: setting system clock to 2013-09-11 11:30:32 UTC (1378899032)
0.861143] Initializing network drop monitor service
0.862607] Freeing unused kernel memory: 576k freed
0.862790] Write protecting the kernel read-only data: 6144k
0.865465] Freeing unused kernel memory: 660k freed
0.868296] Freeing unused kernel memory: 680k freed
1.036736] udevd[48]: starting version 175
1.122845] SCSI subsystem initialized
1.138528] usbcore: registered new interface driver usbfs
1.138554] usbcore: registered new interface driver hub
1.159356] Initialising Xen virtual ethernet driver.
1.174589] usbcore: registered new device driver usb
1.175563] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.216841] libata version 3.00 loaded.
1.217472] ata_piix 0000:00:01.1: version 2.13
1.217661] ata_piix 0000:00:01.1: setting latency timer to 64
1.220286] uhci_hcd: USB Universal Host Controller Interface driver
1.237216] vbd vbd-5696: 19 xenbus_dev_probe on device/vbd/5696
1.238179] scsi0 : ata_piix
1.240812] scsi1 : ata_piix
1.240886] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
1.240891] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
1.241121] uhci_hcd 0000:00:01.2: setting latency timer to 64
1.241160] uhci_hcd 0000:00:01.2: UHCI Host Controller
1.241193] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
1.241726] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
1.242243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
1.242247] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.242251] usb usb1: Product: UHCI Host Controller
1.242254] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 uhci_hcd
1.242257] usb usb1: SerialNumber: 0000:00:01.2
1.242431] hub 1-0:1.0: USB hub found
1.242439] hub 1-0:1.0: 2 ports detected
1.243584] blkfront: xvda: barrier: enabled
1.273565]  xvda: xvda1 xvda2 xvda3
1.279111] FDC 0 is a S82078B
1.415010] ata2.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
1.417738] ata2.01: configured for MWDMA2
1.420388] scsi 1:0:1:0: CD-ROM            QEMU     QEMU DVD-ROM     0.10 PQ: 0 ANSI: 5
1.446428] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
1.446437] cdrom: Uniform CD-ROM driver Revision: 3.20
1.446767] sr 1:0:1:0: Attached scsi CD-ROM sr0
1.452738] sr 1:0:1:0: Attached scsi generic sg0 type 5
1.552112] usb 1-2: new full-speed USB device number 2 using uhci_hcd
1.670580] device-mapper: uevent: version 1.0.3
1.670998] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email]dm-devel@redhat.com[/email]
1.756959] Refined TSC clocksource calibration: 2333.427 MHz.
1.838951] ISO 9660 Extensions: Microsoft Joliet Level 3
1.844605] ISO 9660 Extensions: RRIP_1991A
1.872640] aufs: module is from the staging directory, the quality is unknown, you have been warned.
1.875409] aufs 3.2-20130204
1.908488] loop: module loaded
2.029940] squashfs: version 4.0 (2009/01/31) Phillip Lougher
2.043799] usb 1-2: New USB device found, idVendor=0627, idProduct=0001
2.043804] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
2.043807] usb 1-2: Product: QEMU USB Tablet
2.043810] usb 1-2: Manufacturer: QEMU 0.10.2
2.043813] usb 1-2: SerialNumber: 1
2.208421] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input1
2.209212] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
2.209237] usbcore: registered new interface driver usbhid
2.209240] usbhid: USB HID core driver

10.591700] udevd[696]: starting version 175
11.010305] input: PC Speaker as /devices/platform/pcspkr/input/input2
11.051208] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
11.051216] ACPI: Power Button [PWRF]
11.051293] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input4
11.051298] ACPI: Sleep Button [SLPF]
11.214155] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
11.375030] parport_pc 00:0c: reported by Plug and Play ACPI
11.377415] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
11.519012] Error: Driver ‘pcspkr’ is already registered, aborting…
11.949568] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
16.310550] NET: Registered protocol family 8
16.310554] NET: Registered protocol family 20
19.817308] NET: Registered protocol family 15
19.852446] alg: No test for cipher_null (cipher_null-generic)
19.852494] alg: No test for ecb(cipher_null) (ecb-cipher_null)
19.852534] alg: No test for digest_null (digest_null-generic)
19.852574] alg: No test for compress_null (compress_null-generic)
19.957455] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
20.903211] Initializing XFRM netlink socket
21.689967] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
22.798649] Netfilter messages via NETLINK v0.30.
25.069946] Bluetooth: Core ver 2.16
25.069973] NET: Registered protocol family 31
25.069976] Bluetooth: HCI device and connection manager initialized
25.069980] Bluetooth: HCI socket layer initialized
25.069983] Bluetooth: L2CAP socket layer initialized
25.070220] Bluetooth: SCO socket layer initialized
25.099367] Bluetooth: RFCOMM TTY layer initialized
25.099373] Bluetooth: RFCOMM socket layer initialized
25.099376] Bluetooth: RFCOMM ver 1.11
25.116738] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
25.116742] Bluetooth: BNEP filters: protocol multicast
25.234586] lp0: using parport0 (interrupt-driven).
25.244124] ppdev: user-space parallel port driver
28.599683] ip_tables: © 2000-2006 Netfilter Core Team
28.704076] eth0: no IPv6 routers present

Dichter · September 11, 2013, 5:46am

Und hier die versprochenen screenshots der MobyDick dmesg Ausgabe

maik · September 11, 2013, 5:57am

Hi,

in deinen Protokollen sehe ich den ATA Controller. Auch das virtuelle CD-ROM ist am ATA angebunden. Aber ich sehe KEINE HDD dort. Überprüfe bitte ob die Festplatte korrekt in der VM eingebunden ist.

Grüße

Maik

Dichter · September 11, 2013, 6:02am

geht die frage auch etwas konkreter?
wenn ich debian live cd boote, dann kann ich auf die Festplatte
z.B. per fdisk -l /dev/xvda zugreifen, also ja, die festplatte ist in der VM.

maik · September 11, 2013, 6:47am

Hi,

die HDD unter /dev/xvda ist eine “paravirtualized Xen disk”. Dies unterstützt die MobyDick nicht (@Mathias berichtige mich wenn dies falsch ist). Die musst die XEN Virtualisierung umstellen auf “straight-up SCSI disk emulation” dann sollte die HDD unter /dev/sda auftauchen.

Grüße

Maik

Dichter · September 11, 2013, 6:50am

Also - ich habe es gerade gelöst.

Eure 64bit version unterstützt den Xenserver nicht.
die Lösung heißt, mit der md_iso_70302_32bit.iso zu installieren, da geht es alles wie es soll.

maik · September 11, 2013, 7:00am

OK … viel Spass

Mathias · September 19, 2013, 12:23am

Hallo,

die 32bit und 64bit Version der MobyDick sind bis auf den Architekturunterstützung identisch. Bist Du sicher, dass Dein XEN Server einen 64bit Gast unterstützt?
@Maik: Alles korrekt so ;).

LG
Mathias

Dichter · September 23, 2013, 4:34am

Ja, da bin ich mir sicher. Wir haben Debian 64Bit VMs dort laufen.
zb: Linux nfs 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1+deb7u1 x86_64 GNU/Linux
und auch die ISO von der “Debian-live-7.0.0-amd64-rescue” lässt sich problemlos booten und kann auf die Ressourcen der VM zugreifen.

Der Tipp mal die 32Bit version von MD zu versuchen kam dann auch von meinem RZ-Betreiber, die meinten das “Problem zu kennen”.

Mathias · September 23, 2013, 9:26am

Hallo,

danke für Deine Rückmeldung. Das ist komisch. Wir testen eigentlich gegen XEN mit 64 Bit Gästen und haben einen Standard Debian Kernel aus den Squeeze Backports. Ich werde mir das nochmals ansehen und ggf. hier was posten.

LG
Mathias

Mathias · September 26, 2013, 11:27pm

Hallo,

wir konnten das nachvollziehen und werden herausfinden was da genau das Problem ist und es in einem der nächsten Releases lösen.

LG
Mathias

artpr · September 2, 2015, 3:21am

Hallo Mathias,

ich melde mich hier, da ich eine Frage zu XenServer bzw. XenServer Tool habe, und hier scheint mit die Frage am richtigen Ort zu sein.

Ich habe ein Upgrade vom XenServer vom Version 6.2 auf 6.5 gemacht. Ich habe aber die Virtualisierung vom xs-tools.iso immer noch auf 6.2. Alle andere VMs konnte ich aktualisieren. Die arbeiten aber mit Windows Server oder Debian mit GUI :-).

Meine Frage ist, wie gelange ich überhaput zur CD / DVD bei MobyDick, sodass ich diese aktualisieren vornehmen kann? Mansche werden vielleicht lachen - macht aber nichts :-).

Vielen Dank

sash72 · September 3, 2015, 3:01am

probiere mal folgendes, nachdem du die CD mit den Tolls über das Xencenter eingelegt hast:

mount -t iso9660 /dev/dvd /mnt/

Dann sollte Dir der Inhalt unter /mnt zur Verfügung stehen.

HTH
Sascha