Nach Amtswahl forbidden?

Snoopy78 · May 4, 2015, 1:14am

Hallo,
ich richte mir gerade eine kleine Moby Anlage als Einsteigerversion ein.
Ich habe eine Fritzbox 7490, die die Rufnummern bei der Telekom registriert hat.
Hier sind auch alle Lampen grün.
Nun habe ich drei Amtsleitungen in Moby eingerichtet über die Fritzbox.
Hier sieht auch soweit alles gut aus.
Meine Endgeräte sind 870er von Snom.
Diese werden auch korrekt über das Autoprovisioning erkannt und konfiguriert.
Leider kann ich aber nicht rauswählen, da ich nach Eingabe der Rufnummer und OK ein “forbidden” bekomme.
Da ich noch nicht firm in der Konfiguration von Moby oder Asterisk bin, weiss ich nicht weiter.
Kann mir jemand helfen?

In den Wikis habe ich dafür keine Lösung gefunden.
Die Einrichtung ist nach der Grundkonfiguration aus dem Wiki erfolgt.
Anmeldung an der Anlage über den Browser und SSH funktioniert.
Die CLI bekomme ich auch auf.

Aber bei den Fehlerlösungen bin ich eben noch nicht soweit.

Zur Zeit kann ich nur über ein Fritzfon telefonieren

Gruß

Snoopy78 · May 4, 2015, 10:18pm

Hallo,
OK ich mache Fortschritte mit meinen ersten Schritten und Asterisk

In der CLI wird das Snom 870 nicht richtig registriert.
May 5 03:29:37] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Nur Notrufe” <sip:X1LNbhet741e7e9@192.168.20.55>’ failed for ‘192.168.20.121:5060’ - Wrong password

Ich habe das Telefon per Auto-Provisionining installiert und es wird auch in den Geräten angezeigt. Allerdings nicht mit einem grünen Punkt?

Die drei Amtsleitungen der Fritzbox habe ich wieder rausgenommen und direkt die Telekom VOIP Leitung registriert.
Wenn man dien Port der Fritzbox freigibt, also das Halten in der Konfig der Fritzbox ausschaltet, dann wird die Nummer auch registriert und man kann telefonieren.
Zumindest das Softfone ist nun con außen erreichbar.
Allerdings kann ich nicht raustelefefonieren.
Wenn ich versuche eine Nummer zu wählen erscheint dies:

-- Executing [0089420814568@mdc_location-2:4] Gosub("SIP/QkS3Q9AxBiYe0TH-00000007", "sub_location,s,1(2,0089420814568)") in new stack
-- Executing [s@sub_location:1] Verbose("SIP/QkS3Q9AxBiYe0TH-00000007", "1,used location id: 2 - dialed extension: 0089420814568") in new stack

used location id: 2 - dialed extension: 0089420814568
– Executing [s@sub_location:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “MDC_CALLEE_NUM=0089420814568”) in new stack
– Executing [s@sub_location:3] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [0089420814568@mdc_location-2:5] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_split-location,s,1(2)”) in new stack
– Executing [s@sub_split-location:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,get user for location: 2”) in new stack
get user for location: 2
– Executing [s@sub_split-location:2] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-zero,1”) in new stack
– Executing [s@sub_split-location:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “TMP_USER_ID=3”) in new stack
– Executing [s@sub_split-location:4] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,user id: 3”) in new stack
user id: 3
– Executing [s@sub_split-location:5] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [0089420814568@mdc_location-2:6] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “mdc_user-3,0089420814568,1”) in new stack
– Goto (mdc_user-3,0089420814568,1)
– Executing [0089420814568@mdc_user-3:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,stefan”) in new stack
alex
– Executing [0089420814568@mdc_user-3:2] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_user,s,1(caller,3,120,alex,Alexander Trapp,120,120,120,de)”) in new stack
– Executing [s@sub_user:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,sub_user mode caller”) in new stack
sub_user mode caller
– Executing [s@sub_user:2] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “s-caller,1”) in new stack
– Goto (sub_user,s-caller,1)
– Executing [s-caller@sub_user:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,sub_user user id: 3 - user exten: 120 - user: stefan - realname: Stefan - own mailbox: 120 - watched mailbox: 120 - callerid(num): 120 - language: de”) in new stack
sub_user user id: 3 - user exten: 120 - user: alex - realname: Alexander Trapp - own mailbox: 120 - watched mailbox: 120 - callerid(num): 120 - language: de
– Executing [s-caller@sub_user:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_USER_ID=3”) in new stack
– Executing [s-caller@sub_user:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_NUM=120”) in new stack
– Executing [s-caller@sub_user:4] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_ACC_NAME=alex”) in new stack
– Executing [s-caller@sub_user:5] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_ACC_REALNAME=Stefan”) in new stack
– Executing [s-caller@sub_user:6] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_VM_OWN=120”) in new stack
– Executing [s-caller@sub_user:7] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_CALLER_VM_WATCHED=120”) in new stack
– Executing [s-caller@sub_user:8] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “CALLERID(name)=Stefan”) in new stack
– Executing [s-caller@sub_user:9] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “CALLERID(num)=120”) in new stack
– Executing [s-caller@sub_user:10] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “CHANNEL(language)=de”) in new stack
– Executing [s-caller@sub_user:11] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [0089420814568@mdc_user-3:3] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “internal,0089420814568,1”) in new stack
– Goto (internal,0089420814568,1)
– Executing [0089420814568@internal:1] SIPAddHeader(“SIP/QkS3Q9AxBiYe0TH-00000007”, "“Alert-Info:<http://www.notused.de>;info=alert-internal;x-line-id=0"”) in new stack
– Executing [0089420814568@internal:2] GosubIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1?sub_initcall,s,1(int,0089420814568)”) in new stack
– Executing [s@sub_initcall:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,sub_initcall descent: int exten: 0089420814568”) in new stack
sub_initcall descent: int exten: 0089420814568
– Executing [s@sub_initcall:2] GosubIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1?sub_initloop,s,1”) in new stack
– Executing [s@sub_initloop:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,initial loop”) in new stack
initial loop
– Executing [s@sub_initloop:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “MDC_ALIAS_HOP=0”) in new stack
– Executing [s@sub_initloop:3] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [s@sub_initcall:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_TRANSFERBACK_HOP=0”) in new stack
– Executing [s@sub_initcall:4] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALDESCENT=int”) in new stack
– Executing [s@sub_initcall:5] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “int,1”) in new stack
– Goto (sub_initcall,int,1)
– Executing [int@sub_initcall:1] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLERNUMINIT=120”) in new stack
– Executing [int@sub_initcall:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLEENUMINIT=0089420814568”) in new stack
– Executing [int@sub_initcall:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLEENUMMAP=0089420814568”) in new stack
– Executing [int@sub_initcall:4] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [0089420814568@internal:3] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “main,0089420814568,1”) in new stack
– Goto (main,0089420814568,1)
– Executing [0089420814568@main:1] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_defcall,s,1(0089420814568)”) in new stack
– Executing [s@sub_defcall:1] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_ALIAS_HOP=1”) in new stack
– Executing [s@sub_defcall:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLEENUM=0089420814568”) in new stack
– Executing [s@sub_defcall:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLERNUM=120”) in new stack
– Executing [s@sub_defcall:4] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1?nozap”) in new stack
– Goto (sub_defcall,s,8)
– Executing [s@sub_defcall:8] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCALLERNAME=Stefan”) in new stack
– Executing [s@sub_defcall:9] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__MDC_DIALCHANNELNAME=QkS3Q9AxBiYe0TH”) in new stack
– Executing [s@sub_defcall:10] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [0089420814568@main:2] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “mdc_distribute,0089420814568,1”) in new stack
– Goto (mdc_distribute,0089420814568,1)
– Executing [0089420814568@mdc_distribute:1] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “MDC_INPREFIX_TRUNK=0”) in new stack
– Executing [0089420814568@mdc_distribute:2] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,remove inprefix: 0”) in new stack
remove inprefix: 0
– Executing [0089420814568@mdc_distribute:3] Goto(“SIP/QkS3Q9AxBiYe0TH-00000007”, “mdc_outgoing-14,089420814568,1”) in new stack
– Goto (mdc_outgoing-14,089420814568,1)
– Executing [089420814568@mdc_outgoing-14:1] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_trunk-outgoing-14,089420814568,1”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:1] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_nat2int,s,1(MDC_CALLEE_NUM_INTERNAT,089420814568,00,49,0,40,0)”) in new stack
– Executing [s@sub_nat2int:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,sub_nat2int:: variable: MDC_CALLEE_NUM_INTERNAT - number: 089420814568 - intVAZ: 00 - lkz: 49 - natVAZ: 0 - onKz: 40 - incoming: 0”) in new stack
sub_nat2int:: variable: MDC_CALLEE_NUM_INTERNAT - number: 089420814568 - intVAZ: 00 - lkz: 49 - natVAZ: 0 - onKz: 40 - incoming: 0
– Executing [s@sub_nat2int:2] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-emergency,1”) in new stack
– Executing [s@sub_nat2int:3] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:4] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:5] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-convert,1”) in new stack
– Executing [s@sub_nat2int:6] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-int,1”) in new stack
– Executing [s@sub_nat2int:7] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-intshort,1”) in new stack
– Executing [s@sub_nat2int:8] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-natshort,1”) in new stack
– Executing [s@sub_nat2int:9] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1?s-nat,1”) in new stack
– Goto (sub_nat2int,s-nat,1)
– Executing [s-nat@sub_nat2int:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,national”) in new stack
national
– Executing [s-nat@sub_nat2int:2] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “MDC_CALLEE_NUM_INTERNAT=004989420814568”) in new stack
– Executing [s-nat@sub_nat2int:3] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:2] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “sub_int2nat,s,1(MDC_CALLEE_NUM_NAT,004989420814568,00,49,0,40,0)”) in new stack
– Executing [s@sub_int2nat:1] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,sub_int2nat:: variable: MDC_CALLEE_NUM_NAT - exten: 004989420814568 - intVAZ: 00 - lkz: 49 - natVAZ: 0 - onKz: 40 - incoming: 0”) in new stack
sub_int2nat:: variable: MDC_CALLEE_NUM_NAT - exten: 004989420814568 - intVAZ: 00 - lkz: 49 - natVAZ: 0 - onKz: 40 - incoming: 0
– Executing [s@sub_int2nat:2] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?s-emergency,1”) in new stack
– Executing [s@sub_int2nat:3] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0?nat”) in new stack
– Executing [s@sub_int2nat:4] GotoIf(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1?s-internat,1”) in new stack
– Goto (sub_int2nat,s-internat,1)
– Executing [s-internat@sub_int2nat:1] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “MDC_CALLEE_NUM_NAT=089420814568”) in new stack
– Executing [s-internat@sub_int2nat:2] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:3] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “CALLERID(num)=089123456”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:4] UserEvent(“SIP/QkS3Q9AxBiYe0TH-00000007”, “ResolveCallerName,Strategy: default,Outbound: 1,Channel: SIP/QkS3Q9AxBiYe0TH-00000007”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:5] Wait(“SIP/QkS3Q9AxBiYe0TH-00000007”, “0.25”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:6] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,MDC_RESOLVENAME_HITS = 0”) in new stack
MDC_RESOLVENAME_HITS = 0
– Executing [089420814568@sub_trunk-outgoing-14:7] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, "1,MDC_DIALCALLEENAME = ") in new stack
MDC_DIALCALLEENAME =
– Executing [089420814568@sub_trunk-outgoing-14:8] Verbose(“SIP/QkS3Q9AxBiYe0TH-00000007”, “1,telekom 123456 - Standard”) in new stack
telekom 123456 - Standard
– Executing [089420814568@sub_trunk-outgoing-14:9] Set(“SIP/QkS3Q9AxBiYe0TH-00000007”, “__SPYGROUP=089420814568:120”) in new stack
– Executing [089420814568@sub_trunk-outgoing-14:10] Dial(“SIP/QkS3Q9AxBiYe0TH-00000007”, “SIP/mdc_trunk_conf-14/089420814568,t”) in new stack
== Using SIP VIDEO TOS bits 136
== Using SIP VIDEO CoS mark 6
== Using SIP RTP TOS bits 184
== Using SIP RTP CoS mark 5
– Called SIP/mdc_trunk_conf-14/089420814568
[May 5 07:13:12] WARNING[2101][C-00000004]: chan_sip.c:22866 handle_response_invite: Received response: “Forbidden” from ‘“Stefan” <sip:089123456@tel.t-online.de>;tag=as003c6d2a’
== Everyone is busy/congested at this time (1:0/0/1)
– Executing [089420814568@sub_trunk-outgoing-14:11] Return(“SIP/QkS3Q9AxBiYe0TH-00000007”, “”) in new stack
– Executing [089420814568@mdc_outgoing-14:2] Hangup(“SIP/QkS3Q9AxBiYe0TH-00000007”, “21”) in new stack
== Spawn extension (mdc_outgoing-14, 089420814568, 2) exited non-zero on ‘SIP/QkS3Q9AxBiYe0TH-00000007’
– Executing [h@mdc_outgoing-14:1] Gosub(“SIP/QkS3Q9AxBiYe0TH-00000007”, “def_hangup,s,1(,CHANUNAVAIL,CALL)”) in new stack
– Executing [s@def_hangup:1] NoOp(“SIP/QkS3Q9AxBiYe0TH-00000007”, “>>>def_hangup:: EXTEN: DIALSTATUS: CHANUNAVAIL QUEUESTATUS: REASON: CALL”) in new stack
mobydick*CLI> insecure=invite

Ich habe mal versucht, meine Rufnummer hier rauszunehmen ;-o

Kann es sein, dass ich mir die nackten Config-Dateien ansehen muss, weil hier noch etwas drin steht von meinen ersten Versuchen?
Ich habe fast den Eindruck, dass es noch eine Peer Registrierung von meinen ersten Gehversuchen gibt, die nicht gelöscht ist?
Stichwort 620? Obwohl ich ja nun direkt eine MSN der Telekom registriert habe.

jlorenz · May 4, 2015, 10:23pm

Hallo Snoopy,

es scheint das du dein Gerät noch keinem Benutzer zugewiesen hast. Diese Geräte dürfen dann nur explizit konfigurierte Notrufnummern wählen.

Mehr darüber erfährst du hier oder in unseren Videotutorials.

Grüße,
Jan

maik · May 4, 2015, 10:23pm

Hi Snoopy78,

willkommem in der Mobydick Community.

Hast Du auch Rufregeln (eingehend bzw.ausgehend) konfiguriert ?
https://wiki.pascom.net/confluence/pages/viewpage.action?pageId=11108454

Grüße
Maik

Snoopy78 · May 5, 2015, 12:13am

Nachdem ich das Telefon wieder zugewiesen habe, ist die Meldung anders, aber immernoch “failed”…

Das Telefon wurde automatisch über dhcp zugewiesen.
Ein Kennwort etc. kann ich dort ja nicht eingeben, oder?

-- Added extension '_123456' priority 3 to mdc_mapping-8
-- Registered extension context 'mdc_distribute'; registrar: pbx_config
-- Including context 'mdc_pre-script' in context 'mdc_distribute'
-- Including context 'mdc_faxdevice' in context 'mdc_distribute'
-- Including context 'mdc_intercom' in context 'mdc_distribute'
-- Including context 'mdc_condition' in context 'mdc_distribute'
-- Including context 'mdc_meetme' in context 'mdc_distribute'
-- Including context 'mdc_script' in context 'mdc_distribute'
-- Including context 'mdc_roaming' in context 'mdc_distribute'
-- Including context 'mdc_emergency' in context 'mdc_distribute'
-- Including context 'mdc_speeddial' in context 'mdc_distribute'
-- Including context 'mdc_pickup-ident' in context 'mdc_distribute'
-- Including context 'mdc_ident' in context 'mdc_distribute'
-- Including context 'mdc_ivr' in context 'mdc_distribute'
-- Including context 'mdc_isdndevice' in context 'mdc_distribute'
-- Including context 'mdc_login-team' in context 'mdc_distribute'
-- Including context 'mdc_pickup-team' in context 'mdc_distribute'
-- Including context 'mdc_team' in context 'mdc_distribute'
-- Including context 'mdc_post-script' in context 'mdc_distribute'
-- Including context 'mdc_outgoing' in context 'mdc_distribute'
-- Including context 'mdc_exception' in context 'mdc_distribute'
-- Registered extension context 'mdc_faxdevice'; registrar: pbx_config
-- Registered extension context 'mdc_intercom'; registrar: pbx_config
-- Registered extension context 'sub_int2nat'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_int2nat
-- Added extension 's' priority 2 to sub_int2nat
-- Added extension 's' priority 3 to sub_int2nat
-- Added extension 's' priority 4 to sub_int2nat
-- Added extension 's' priority 5 to sub_int2nat
-- Added extension 's' priority 6 to sub_int2nat
-- Added extension 's-internat' priority 1 to sub_int2nat
-- Added extension 's-internat' priority 2 to sub_int2nat
-- Added extension 's-emergency' priority 1 to sub_int2nat
-- Added extension 's-emergency' priority 2 to sub_int2nat
-- Registered extension context 'sub_nat2int'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_nat2int
-- Added extension 's' priority 2 to sub_nat2int
-- Added extension 's' priority 3 to sub_nat2int
-- Added extension 's' priority 4 to sub_nat2int
-- Added extension 's' priority 5 to sub_nat2int
-- Added extension 's' priority 6 to sub_nat2int
-- Added extension 's' priority 7 to sub_nat2int
-- Added extension 's' priority 8 to sub_nat2int
-- Added extension 's' priority 9 to sub_nat2int
-- Added extension 's' priority 10 to sub_nat2int
-- Added extension 's-convert' priority 1 to sub_nat2int
-- Added extension 's-convert' priority 2 to sub_nat2int
-- Added extension 's-int' priority 1 to sub_nat2int
-- Added extension 's-int' priority 2 to sub_nat2int
-- Added extension 's-int' priority 3 to sub_nat2int
-- Added extension 's-intshort' priority 1 to sub_nat2int
-- Added extension 's-intshort' priority 2 to sub_nat2int
-- Added extension 's-intshort' priority 3 to sub_nat2int
-- Added extension 's-nat' priority 1 to sub_nat2int
-- Added extension 's-nat' priority 2 to sub_nat2int
-- Added extension 's-nat' priority 3 to sub_nat2int
-- Added extension 's-natshort' priority 1 to sub_nat2int
-- Added extension 's-natshort' priority 2 to sub_nat2int
-- Added extension 's-natshort' priority 3 to sub_nat2int
-- Added extension 's-local' priority 1 to sub_nat2int
-- Added extension 's-local' priority 2 to sub_nat2int
-- Added extension 's-local' priority 3 to sub_nat2int
-- Added extension 's-emergency' priority 1 to sub_nat2int
-- Added extension 's-emergency' priority 2 to sub_nat2int
-- Registered extension context 'sub_defcall'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_defcall
-- Added extension 's' priority 2 to sub_defcall
-- Added extension 's' priority 3 to sub_defcall
-- Added extension 's' priority 4 to sub_defcall
-- Added extension 's' priority 5 to sub_defcall
-- Added extension 's' priority 6 to sub_defcall
-- Added extension 's' priority 7 to sub_defcall
-- Added extension 's' priority 8 to sub_defcall
-- Added extension 's' priority 9 to sub_defcall
-- Added extension 's' priority 10 to sub_defcall
-- Registered extension context 'mdc_internal'; registrar: pbx_config
-- Added extension '_+*%#a-zA-Z0-9]!' priority 1 to mdc_internal
-- Added extension '_+*%#a-zA-Z0-9]!' priority 2 to mdc_internal
-- Added extension '_+*%#a-zA-Z0-9]!' priority 3 to mdc_internal
-- Added extension '_+*%#a-zA-Z0-9].' priority 1 to mdc_internal
-- Added extension '_+*%#a-zA-Z0-9].' priority 2 to mdc_internal
-- Added extension '_+*%#a-zA-Z0-9].' priority 3 to mdc_internal
-- Registered extension context 'sub_initcall'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_initcall
-- Added extension 's' priority 2 to sub_initcall
-- Added extension 's' priority 3 to sub_initcall
-- Added extension 's' priority 4 to sub_initcall
-- Added extension 's' priority 5 to sub_initcall
-- Added extension 'ext' priority 1 to sub_initcall
-- Added extension 'ext' priority 2 to sub_initcall
-- Added extension 'ext' priority 3 to sub_initcall
-- Added extension 'ext' priority 4 to sub_initcall
-- Added extension 'int' priority 1 to sub_initcall
-- Added extension 'int' priority 2 to sub_initcall
-- Added extension 'int' priority 3 to sub_initcall
-- Added extension 'int' priority 4 to sub_initcall
-- Registered extension context 'mdc_external'; registrar: pbx_config
-- Added extension '_+*%#a-zA-Z0-9]!' priority 1 to mdc_external
-- Added extension '_+*%#a-zA-Z0-9]!' priority 2 to mdc_external
-- Added extension '_+*%#a-zA-Z0-9]!' priority 3 to mdc_external
-- Added extension '_+*%#a-zA-Z0-9].' priority 1 to mdc_external
-- Added extension '_+*%#a-zA-Z0-9].' priority 2 to mdc_external
-- Added extension '_+*%#a-zA-Z0-9].' priority 3 to mdc_external
-- Registered extension context 'sub_initloop'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_initloop
-- Added extension 's' priority 2 to sub_initloop
-- Added extension 's' priority 3 to sub_initloop
-- Registered extension context 'mdc_main'; registrar: pbx_config
-- Added extension '_+*%#a-zA-Z0-9]!' priority 1 to mdc_main
-- Added extension '_+*%#a-zA-Z0-9]!' priority 2 to mdc_main
-- Registered extension context 'sub_hangup'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_hangup
-- Added extension 's' priority 2 to sub_hangup
-- Added extension 's' priority 3 to sub_hangup
-- Added extension 's' priority 4 to sub_hangup
-- Added extension 's' priority 5 to sub_hangup
-- Added extension 'noanswer' priority 1 to sub_hangup
-- Added extension 'noanswer' priority 2 to sub_hangup
-- Added extension 'busy' priority 1 to sub_hangup
-- Added extension 'busy' priority 2 to sub_hangup
-- Added extension 'unavailable' priority 1 to sub_hangup
-- Added extension 'unavailable' priority 2 to sub_hangup
-- Registered extension context 'sub_curl'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_curl
-- Added extension 's' priority 2 to sub_curl
-- Added extension 's' priority 3 to sub_curl
-- Added extension 's' priority 4 to sub_curl
-- Registered extension context 'mdc_hint'; registrar: pbx_config
-- Including context 'mdc_hint-condition' in context 'mdc_hint'
-- Including context 'mdc_hint-script' in context 'mdc_hint'
-- Including context 'mdc_hint-ident' in context 'mdc_hint'
-- Including context 'mdc_hint-login-team' in context 'mdc_hint'
-- Including context 'mdc_hint-team' in context 'mdc_hint'
-- Registered extension context 'mdc_hint-condition'; registrar: pbx_config
-- Registered extension context 'mdc_condition'; registrar: pbx_config
-- Added extension 'h' priority 1 to mdc_condition
-- Registered extension context 'sub_condition-switch'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_condition-switch
-- Added extension 's' priority 2 to sub_condition-switch
-- Added extension 's-inactive' priority 1 to sub_condition-switch
-- Added extension 's-inactive' priority 2 to sub_condition-switch
-- Added extension 's-inactive' priority 3 to sub_condition-switch
-- Added extension 's-inactive' priority 4 to sub_condition-switch
-- Added extension 's-inactive' priority 5 to sub_condition-switch
-- Added extension 's-inactive' priority 6 to sub_condition-switch
-- Added extension 's-active' priority 1 to sub_condition-switch
-- Added extension 's-active' priority 2 to sub_condition-switch
-- Added extension 's-active' priority 3 to sub_condition-switch
-- Added extension 's-active' priority 4 to sub_condition-switch
-- Added extension 's-active' priority 5 to sub_condition-switch
-- Added extension 's-active' priority 6 to sub_condition-switch
-- Registered extension context 'sub_rcs'; registrar: pbx_config
-- Added extension 's' priority 1 to sub_rcs
-- Added extension 's' priority 2 to sub_rcs
-- Added extension 's' priority 3 to sub_rcs
-- Added extension 's' priority 4 to sub_rcs
-- Added extension 's' priority 5 to sub_rcs
-- Added extension 's' priority 6 to sub_rcs
-- Added extension 's' priority 7 to sub_rcs
-- Added extension 's' priority 8 to sub_rcs
-- Added extension 's' priority 9 to sub_rcs
-- Added extension 's' priority 10 to sub_rcs
-- Added extension 's' priority 11 to sub_rcs
-- Added extension 's' priority 12 to sub_rcs
-- Added extension 's' priority 13 to sub_rcs
-- Added extension 's' priority 14 to sub_rcs
-- Added extension 's' priority 15 to sub_rcs
-- Added extension 's' priority 16 to sub_rcs
-- Added extension 's' priority 17 to sub_rcs
-- Added extension 's' priority 18 to sub_rcs
-- Added extension 's' priority 19 to sub_rcs
-- Added extension 's' priority 20 to sub_rcs
-- Added extension 's' priority 21 to sub_rcs
-- Added extension 's' priority 22 to sub_rcs
-- Added extension 's' priority 23 to sub_rcs
-- Added extension 's' priority 24 to sub_rcs
-- Added extension 's' priority 25 to sub_rcs
-- Added extension 's' priority 26 to sub_rcs
-- Added extension 's' priority 27 to sub_rcs
-- Added extension 's' priority 28 to sub_rcs
-- Added extension 's' priority 29 to sub_rcs
-- Added extension 's' priority 30 to sub_rcs
-- Added extension 's' priority 31 to sub_rcs
-- Added extension 's' priority 32 to sub_rcs
-- Added extension 's-invalid' priority 1 to sub_rcs
-- Added extension 's-invalid' priority 2 to sub_rcs
-- Added extension 's-invalid' priority 3 to sub_rcs
-- Added extension 's-failed' priority 1 to sub_rcs
-- Added extension 's-failed' priority 2 to sub_rcs
-- Registered extension context 'mdc_meetme'; registrar: pbx_config
-- Registered extension context 'mdc_pre-script'; registrar: pbx_config
-- Including context 'def_spy' in context 'mdc_pre-script'
-- Including context 'def_rcs' in context 'mdc_pre-script'
-- Including context 'def_alias' in context 'mdc_pre-script'
-- Including context 'def_mobility' in context 'mdc_pre-script'
-- Including context 'def_voicebox' in context 'mdc_pre-script'
-- Including context 'def_meetme' in context 'mdc_pre-script'
-- Registered extension context 'mdc_post-script'; registrar: pbx_config
-- Registered extension context 'mdc_hint-script'; registrar: pbx_config
-- Registered extension context 'mdc_script'; registrar: pbx_config
-- Registered extension context 'def_queueactions'; registrar: pbx_config
-- Added extension '10' priority 1 to def_queueactions
-- Added extension '10' priority 2 to def_queueactions

Reloading SIP
== Parsing ‘/etc/asterisk/sip.conf’: Found
== Parsing ‘/etc/asterisk/mdc_sip_register.conf’: Found
== Parsing ‘/etc/asterisk/mdc_sip_ipdevice.conf’: Found
== Parsing ‘/etc/asterisk/mdc_sip_trunk.conf’: Found
== Parsing ‘/etc/asterisk/mdc_sip_gw.conf’: Found
== Using SIP TOS bits 96
== Using SIP CoS mark 4
== Parsing ‘/etc/asterisk/sip_notify.conf’: Found
[May 5 09:08:30] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:08:30] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
[May 5 09:08:30] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:08:30] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
mobydick*CLI> insecure=invite

Snoopy78 · May 5, 2015, 12:24am

Hallo,

hmm, as mich wirklich irritiert ist die 620, die immer mal wieder in den Fehlermeldungen auftaucht. Den Trunk mit der Fritzbox habe ich aber schon lange wieder aus den Konfigs raus.
Das Snom will sich nachhaltig nicht an der Anlage anmelden.
Soll/muss ich es manuell konfigurieren?

May 5 09:08:30] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:08:30] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
[May 5 09:08:30] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:08:30] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
[May 5 09:13:19] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:13:19] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
[May 5 09:18:09] WARNING[2101]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:18:09] NOTICE[2101]: chan_sip.c:27897 handle_request_register: Registration from ‘“Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>’ failed for ‘192.168.20.112:5060’ - Username/auth name mismatch
– Unregistered SIP ‘QkS3Q9AxBiYe0TH’
[May 5 09:20:55] WARNING[2101][C-00000005]: chan_sip.c:16297 check_auth: username mismatch, have <P2MnmSwug41e7e9>, digest has <620>
[May 5 09:20:55] NOTICE[2101][C-00000005]: chan_sip.c:25357 handle_request_invite: Failed to authenticate device “Stefan” <sip:P2MnmSwug41e7e9@192.168.20.55>;tag=rkyhzpx1mx
mobydick*CLI> insecure=invite