Analoggeraet klingelt nicht

Support
1

Ich hab da noch ein Problem, dass ein Analoggeraet mit der Durchwahl 71 nicht anrufbar ist. Im SIP Telefon wird es vor dem waehlen erkannt und dann steht da “Not Found: 71”. Von Aussen geht es auch nicht.

Die 70 jedoch geht.

Es haengt alles an einem Patton 4114 und scheint gleich konfiguriert zu sein.

Eine Idee?

2

bitte die “show running-config” des Patton posten und evtl. noch einen debug output der Asterisk cli.

3

Hallo Andreashe,

kannst Du bitte den output der asterisk console hier posten während Du den Rufaufbau startest.

Im Detail:
Via ssh auf den mobydick einloggen. Dann asterisk -r in der Console starten und den output hier posten.

Grüße

Maik

4

Hier asterisk:


    -- Executing Set("SIP/AH-b6803378", "MDC_CHANNEL_PROTOCOL=SIP") in new stack
    -- Executing Set("SIP/AH-b6803378", "MDC_CHANNEL_ID=AH-b6803378") in new stack
    -- Executing Set("SIP/AH-b6803378", "MDC_CHANNEL_TMP=AH-b6803378") in new stack
    -- Executing Set("SIP/AH-b6803378", "MDC_CHANNEL_NAME=AH") in new stack
    -- Executing GosubIf("SIP/AH-b6803378", "1?mdc_initcall-int|71|1") in new stack
    -- Executing NoOp("SIP/AH-b6803378", "initial call") in new stack
    -- Executing Set("SIP/AH-b6803378", "__MDC_DIALDESCENT=int") in new stack
    -- Executing Set("SIP/AH-b6803378", "__MDC_DIALCALLEENUM=71") in new stack
    -- Executing Set("SIP/AH-b6803378", "__MDC_DIALCALLERNUM=44") in new stack
    -- Executing GotoIf("SIP/AH-b6803378", "1?nozap") in new stack
    -- Goto (mdc_initcall-int,71,8)
    -- Executing Set("SIP/AH-b6803378", "__MDC_DIALCALLERNAME=44 AH") in new stack
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing Gosub("SIP/AH-b6803378", "mdc_defcall|71|1") in new stack
    -- Executing GotoIf("SIP/AH-b6803378", "1?nozap") in new stack
    -- Goto (mdc_defcall,71,4)
    -- Executing Set("SIP/AH-b6803378", "__MDC_DIALCHANNELNAME=AH") in new stack
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing SIPAddHeader("SIP/AH-b6803378", ""Alert-Info:<http://www.notused.de>;info=alert-internal;x-line-id=0"") in new stack
    -- Executing Macro("SIP/AH-b6803378", "pre-main") in new stack
Nov  5 14:29:43 WARNING[5015]: app_macro.c:208 macro_exec: No such context 'macro-pre-main' for macro 'pre-main'
    -- Executing GosubIf("SIP/AH-b6803378", "1?mdc_initloop|s|1") in new stack
    -- Executing NoOp("SIP/AH-b6803378", "initial loop") in new stack
    -- Executing Set("SIP/AH-b6803378", "MDC_ALIAS_HOP=0") in new stack
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing Goto("SIP/AH-b6803378", "main|71|1") in new stack
    -- Goto (main,71,1)
    -- Executing Set("SIP/AH-b6803378", "_MDC_VOICEMAIL=71") in new stack
    -- Executing Set("SIP/AH-b6803378", "_MDC_WATCHED_VOICEMAIL=0") in new stack
    -- Executing Goto("SIP/AH-b6803378", "mdc_ident-23|71|1") in new stack
    -- Goto (mdc_ident-23,71,1)
    -- Executing NoOp("SIP/AH-b6803378", "alias-check:: Rufumleitung von 71 - 0") in new stack
    -- Executing GotoIf("SIP/AH-b6803378", "0?71-umleitung|1:71-dial|1") in new stack
    -- Goto (mdc_ident-23,71-dial,1)
    -- Executing Gosub("SIP/AH-b6803378", "mdc_prefix-71-int|71|1") in new stack
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing Gosub("SIP/AH-b6803378", "mdc_main-71-int|71|1") in new stack
    -- Executing Dial("SIP/AH-b6803378", "SIP/Wireless1||o") in new stack
    -- Called Wireless1
    -- SIP/Wireless1-081ea130 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing Gosub("SIP/AH-b6803378", "mdc_suffix-71-int|71|1") in new stack
    -- Executing Return("SIP/AH-b6803378", "") in new stack
    -- Executing Hangup("SIP/AH-b6803378", "1") in new stack
  == Spawn extension (mdc_ident-23, 71-dial, 4) exited non-zero on 'SIP/AH-b6803378'
5

Hallo Andreashe,

der MobyDick meldet:

– Executing Dial(“SIP/AH-b6803378”, “SIP/Wireless1||o”) in new stack
– Called Wireless1
– SIP/Wireless1-081ea130 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)

Dies bedeutet die Gegenstelle Wireless1 ist besetzt. Ich nehme an dies ist dein Patton. Poste mal bitte wie Mathias schon sagte die config vom Patton.

Grüße

Maik

6

Hmm, jetzt geht es nach dem Patton Neustart. Mal sehen, ob sich das wiederholt.