Analog Fax an Patton 4112

netzi01 · February 19, 2015, 1:10pm

Hallo,
ich habe hier ein kleines Problem; an einer Patton SN4112 habe ich ein analoges Fax angeschlossen. Eingehende Faxe funktionieren einwandfrei, ausgehende jedoch nicht.
Wenn ich ein Fax versenden möchte sehe ich auch im CLI der MD nichts ankommen.
Muß ich auf dem Gateway noch was einstellen für ausgehende Faxe?
mfg.
Hartmut

Nachtrag:
Im Log der Patton steht folgendes:
>>
12:38:02 CC > [EP router-00d64b58/incoming] Accept call 00d69ac0
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: E164-Number -> 0917243983552
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Type-Of-Number -> Unknown
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Numbering-Plan -> Unknown
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Name ->
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Network -> router
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Call-Leg-ID -> 0x00d6f4d0
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: State -> TRYING
12:38:02 CC > [EP router-00d64b58] Start route-lookup
12:38:02 CR > [switch] Routing-Lookup:
12:38:02 CR > Execute all entries in table IF_FXS_0_0-precall-service
12:38:02 CR > Find best-matching called- entry in table DEVICE_MAPPING
12:38:02 CR > 00: Prefix Timeout Expression: called-e164 of 0917243983552 completely (timeout) matches ^(?
12:38:02 CR > Selecting entry 0
12:38:02 CR > Find best-matching calling- entry in table DEVICE_MOBYDICK
12:38:02 CR > NO MATCHING ENTRY
12:38:02 CR > Execute all entries in table MOBYDICK-dest
12:38:02 CR > Execute all entries in table route-found-place-call
12:38:02 CR > Lookup result: Route found; place call (timeout=5)
12:38:02 CC > [EP router-00d64b58] Deferred route found; wait for additional digits for 5s)
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: Supports Overlap-Receiving -> false
12:38:02 CC > [EP router-00d64b58/incoming] Set call-leg property: State -> ADDRESS-INCOMPLETE
12:38:02 CC > [EP router-010153d8/incoming] Drop call 00d63110
12:38:02 CC > [EP router-010153d8/incoming] Set call-leg property: Cause -> Normal call clearing
12:38:02 CC > [EP router-010153d8/incoming] Set call-leg property: State -> RELEASED
12:38:02 CC > [EP IF_FXS_0_0/active] Set call-leg property: Provides Data -> true
12:38:07 CC > [EP router-00d64b58] No additional digits after timeout; place call
12:38:07 CC > [EP router-00d64b58] Route to provider ‘MOBYDICK’
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: E164-Number ->
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Type-Of-Number -> Unknown
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Numbering-Plan -> Unknown
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Presentation-Indicator -> Presentation allowed
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Screening-Indicator -> User provided, not screened
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Name ->
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Supports Overlap-Sending -> true
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Network -> router
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: Call-Leg-ID -> 0x01015128
12:38:07 CC > [EP router-00d64b58/outgoing] Set call-leg property: State -> CONNECTED
12:38:07 CC > [Call 01013ef8] Set call property: Context -> 0x00000022
12:38:07 CC > [Call 01013ef8] Set call property: Information-Transfer-Capability -> 3.1kHz Audio
12:38:07 CC > [Call 01013ef8] Set call property: Hops -> 0x0000000f
12:38:07 CC > [EP router-00d64b58/outgoing] Dial to provider MOBYDICK () using call 01013ef8
12:38:07 CC > [EP MOBYDICK-010118d0/active] Accept call 01013ef8
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: E164-Number -> 0917243983552
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Type-Of-Number -> Unknown
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Numbering-Plan -> Unknown
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Name ->
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Network -> GW_SIP_DEVICE
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Call-Leg-ID -> 0x00d6f188
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: State -> TRYING
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Supported Codecs -> Voice: G.711 A-law[20/20], G.711 u-law[20/20]
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Codec Negotiating -> Idle
12:38:07 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Network -> GW_SIP_DEVICE/10.0.11.7
12:38:07 CC > [Call 00d69ac0] Set call property: Hops -> 0x0000000f
12:38:07 CC > [EP router-00d64b58/incoming] Set call-leg property: Supported Codecs -> Voice: G.711 A-law[20/20], G.711 u-law[20/20]
12:38:07 CC > [EP router-00d64b58/incoming] Set call-leg property: Codec Negotiating -> Idle
12:38:07 CC > [EP router-00d64b58/incoming] Set call-leg property: State -> TRYING
12:38:11 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: Quality-Of-Service -> MOS 4.40, RTP, (undefined) (0ms), Local: Rx 0 pkts, 0 bytes, 0 lost, jitter 0 ms, Tx 0 pkts, 0 bytes, rtt 0 ms, Remote: Rx 0 pkts, 0 bytes, 0 lost, jitter 0 ms, Tx 0 pkts, 0 bytes, rtt 0 ms
12:38:11 CC > [EP router-00d64b58/incoming] Set call-leg property: Quality-Of-Service -> MOS 4.40, RTP, (undefined) (0ms), Local: Rx 0 pkts, 0 bytes, 0 lost, jitter 0 ms, Tx 0 pkts, 0 bytes, rtt 0 ms, Remote: Rx 0 pkts, 0 bytes, 0 lost, jitter 0 ms, Tx 0 pkts, 0 bytes, rtt 0 ms
12:38:26 CC > [EP IF_FXS_0_0/active] Drop call 00d69ac0
12:38:26 CC > [EP IF_FXS_0_0/active] Set call-leg property: Provides Data -> false
12:38:26 CC > [EP IF_FXS_0_0/active] Set call-leg property: Cause -> Normal call clearing
12:38:26 CC > [EP IF_FXS_0_0/active] Set call-leg property: State -> RELEASED
12:38:26 CC > [EP router-00d64b58/outgoing] Set call-leg property: Cause -> Normal call clearing
12:38:26 CC > [EP router-00d64b58/outgoing] Set call-leg property: State -> RELEASED
12:38:26 CC > [EP router-00d64b58/incoming] Drop call 00d69ac0
12:38:26 CC > [EP router-00d64b58/incoming] Set call-leg property: Cause -> Normal call clearing
12:38:26 CC > [EP router-00d64b58/incoming] Set call-leg property: State -> RELEASED
12:38:26 CC > [EP MOBYDICK-010118d0/active] Set call-leg property: State -> RELEASED
>>
Klar ist scheinbar, daß bei einem ausgehenden Fax er nicht weiß wohin; und ich nicht wo ich das der Box mitteilen muß.

mfg.
Hartmut

netzi01 · February 27, 2015, 2:31am

Hallo, hat das keiner irgendwo im Einsatz?
Ich bräuchte da mal dringend Unterstützung.
mfg.
Hartmut

Benjamin · February 27, 2015, 4:37am

Hallo Hartmut,

was spricht denn der sip debug in der asterisk cli ?

sip set debug on

Gruß

Benjamin

netzi01 · March 2, 2015, 4:00am

Hallo Benjamin,

tja, leider sehe ich gar nichts; als ob der Fax-Versand die Patton-Box gar nicht verläßt.
mfg.
Hartmut

Fabian · March 2, 2015, 6:03am

ich kämpfe schon lange mit dem Problem und habe leider auch noch keine Lösung gefunden.

Benjamin · March 5, 2015, 11:53pm

Hallo,

ihr könntet mal den wert von sys.peripherals.patton.debug von 0 auf 1 in den Systemeinstellungen ändern, danach speichern die Telefoniekonfiganwenden und das Patton neu provisionieren. Hierbei wird die konfig mit ausgegeben, vllt. ist hier irgendwo was zu erkennen.

Gruß

Benjamin

Fabian · April 15, 2015, 2:49am

Hallo Benjamin,

wenn ich den debug auf 1 gesetzt habe, kann ich wo die ausgegebene Konfiguration ansehen?

Danke und Gruss
Fabian

Fabian · April 15, 2015, 4:38am

Hallo Benjamin,

kannst Du mit folgenden Zeilen des sip set debug etwas anfangen?

<------------>
[Apr 15 13:21:24] NOTICE[31367]: chan_sip.c:27677 handle_request_subscribe: Received SIP subscribe for peer without mailbox: jOA8voTNQ7127e2
Really destroying SIP dialog ‘b3492e55a89f-4k9mdhvcl4dy’ Method: SUBSCRIBE
Reliably Transmitting (no NAT) to “IP-Patton”:5060:
OPTIONS sip:TrhZWYjro0a4c89@“IP-Patton”:5060 SIP/2.0
Via: SIP/2.0/UDP “IP-MobyDick”:5060;branch=z9hG4bK73eb5b0b
Max-Forwards: 70
From: “asterisk” <sip:asterisk@“IP-MobyDick”>;tag=as4fa1baf7
To: <sip:TrhZWYjro0a4c89@“IP-Patton”:5060>
Contact: <sip:asterisk@“IP-MobyDick”:5060>
Call-ID: 3bbf1bda2c21359915d03ba508df8cf5@“IP-MobyDick”:5060
CSeq: 102 OPTIONS
User-Agent: Asterisk PBX 11.6-cert10
Date: Wed, 15 Apr 2015 11:21:27 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0

<— SIP read from UDP:“IP-Patton”:5060 —>
SIP/2.0 200 OK
Accept: application/sdp, application/dtmf-relay, application/hook-flash, application/QSIG, application/broadsoft, application/vnd.etsi.aoc+xml
Via: SIP/2.0/UDP “IP-MobyDick”:5060;branch=z9hG4bK73eb5b0b
From: “asterisk” <sip:asterisk@“IP-MobyDick”>;tag=as4fa1baf7
To: <sip:TrhZWYjro0a4c89@“IP-Patton”:5060>;tag=611721484
Call-ID: 3bbf1bda2c21359915d03ba508df8cf5@“IP-MobyDick”:5060
CSeq: 102 OPTIONS
Allow: ACK, BYE, CANCEL, INVITE, NOTIFY, OPTIONS, INFO, UPDATE, REFER, REGISTER
Server: Patton SN4112 JS EUI 00A0BA0A4C89 R6.7 2015-01-06 H323 SIP FXS FXO M5T SIP Stack/4.2.8.10
Content-Length: 0

Danke und Gruss
Fabian

Fabian · April 15, 2015, 5:09am

Oder allenfalls diese Zeilen:

<— SIP read from UDP:“IP-Patton”:5060 —>
REGISTER sip:“IP-MobyDick” SIP/2.0
Via: SIP/2.0/UDP “IP-Patton”:5060;branch=z9hG4bKbee130959818d6093
Max-Forwards: 70
From: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>;tag=42024bd656
To: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>
Call-ID: 926090fdc5f6ed29
CSeq: 10169 REGISTER
Contact: <sip:TrhZWYjro0a4c89@“IP-Patton”:5060>
Expires: 300
User-Agent: Patton SN4112 JS EUI 00A0BA0A4C89 R6.7 2015-01-06 H323 SIP FXS FXO M
5T SIP Stack/4.2.8.10
Content-Length: 0

<------------->
— (11 headers 0 lines) —
Sending to “IP-Patton”:5060 (no NAT)
Sending to “IP-Patton”:5060 (no NAT)

<— Transmitting (no NAT) to “IP-Patton”:5060 —>
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP “IP-Patton”:5060;branch=z9hG4bKbee130959818d6093;received=10.93
.30.14
From: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>;tag=42024bd656
To: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>;tag=as271bd0b8
Call-ID: 926090fdc5f6ed29
CSeq: 10169 REGISTER
Server: Asterisk PBX 11.6-cert10
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLIS
H
Supported: replaces, timer
WWW-Authenticate: Digest algorithm=MD5, realm=“mobydick”, nonce=“5b65a299”
Content-Length: 0

<------------>
Scheduling destruction of SIP dialog ‘926090fdc5f6ed29’ in 32000 ms (Method: REG
ISTER)

<— SIP read from UDP:“IP-Patton”:5060 —>
REGISTER sip:“IP-MobyDick” SIP/2.0
Via: SIP/2.0/UDP “IP-Patton”:5060;branch=z9hG4bK547be1fee107d87ce
Max-Forwards: 70
From: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>;tag=42024bd656
To: <sip:TrhZWYjro0a4c89@“IP-MobyDick”>
Call-ID: 926090fdc5f6ed29
CSeq: 10170 REGISTER
Authorization: Digest username=“TrhZWYjro0a4c89”,realm=“mobydick”,nonce=“5b65a29
9”,uri=“sip:“IP-MobyDick””,response=“f578385ca2b5e27388c545a66913ff3c”,algorithm=M
D5
Contact: <sip:TrhZWYjro0a4c89@“IP-Patton”:5060>
Expires: 300
User-Agent: Patton SN4112 JS EUI 00A0BA0A4C89 R6.7 2015-01-06 H323 SIP FXS FXO M
5T SIP Stack/4.2.8.10
Content-Length: 0

Fabian · April 15, 2015, 6:52am

Hallo Benjamin,

habe an dem Port einmal ein Analog-Telefon angeschlossen und eine Rufnummer zugeteilt. Wenn ich dann Intern auf diesen Teilnehmer anrufe, klingelt dieses und ich kann den Hörer abheben und ein Gespräch führen. Abgehend vom Analog-Phone geht es aber nicht. Habe zwar den Summton und ich kann die Nummer wählen, es passiert aber nichts und es bleibt im Hörer und an beim gerufenen Teilnehmer still.

Kannst Du damit etwas anfangen?

Vielen Dank und Gruss
Fabian

Fabian · June 11, 2015, 7:28am

Hallo Zusammen,

habe die MD auf 7.08.07 aktualisiert und nun kann ich faxen ohne das ich eine Änderung gemacht habe.
Hat Pascom etwas angepasst?

Danke und Grüsse
Fabian

Fabian · June 11, 2015, 7:29am

Hallo Zusammen,

habe die MD auf 7.08.07 aktualisiert und nun kann ich faxen ohne das ich eine Änderung gemacht habe.

Danke und Grüsse
Fabian